Nowadays, rental LED displays are widely used in commercial events like concerts, shows, exhibitions, brand launches, etc. Thanks to their flexible deployment and convenient installation, demand for rental LED displays continues to grow.
As we all know, rental displays face frequently assembly, disassembly, transportation, and redeployment. This means rental LED displays demand higher on on both protection and maintenance efficiency. These two factors can directly affect their competitiveness in the market.
To address these requirements, Kinglight has introduced two new 2-in-1 LEDs for outdoor rental displays: the 2391 and 2297.
Now let’s take a closer look at the key features of the two new 2-in-1 LEDs for outdoors and why they can be an ideal choice for high-end outdoor rental LED displays.
For outdoor rental LED display projects, more and more end users are installing protective masks over LED modules. These masks mainly serve three purposes.
Rental LED displays need to be frequently assembled, disassembled, stacked, and transported. During these processes, bumps and scratches are difficult to avoid.
A protective mask provides a physical barrier for the LEDs, helping reduce the risk of direct damage caused by external impact.
A protective mask can help reduce reflections from ambient light and minimize glare and stray light interference.
This can improve the display’s contrast and help maintain stable image quality in outdoor environments.
Outdoor LED displays are often exposed to challenging environmental conditions, including dust and rain.
A protective mask can help prevent moisture and dust from entering the display, contributing to a longer service life for rental LED displays.
For these reasons, protective masks have become a common choice for many LED display manufacturers and end users.
One of the key differences of Kinglight’s outdoor 2-in-1 LEDs is the snap-fit design designed on both sides of the LED package to accommodate protective mask installation.
Let’s take a closer look at the product features and advantages.
When conventional 2-in-1 LEDs or individual LEDs are used to build rental LED displays, protective masks are often secured with a large number of screws to ensure a tight fit.
This approach can increase the structural complexity of the LED module, add assembly procedures, and reduce overall production efficiency.
It can also make LED replacement and maintenance more time-consuming when a component fails. After repeated assembly and disassembly, the protective mask may become less securely fitted, reducing its protective performance and increasing overall maintenance costs.
Kinglight’s outdoor 2-in-1 LEDs feature an innovative snap-fit design, which can significantly reduce the number of screws required and make screw-free protective mask assembly possible.
Note: Screw-free protective mask assembly is a relatively aggressive application approach. Stability should be carefully evaluated according to the actual application environment and operating conditions.
For LED display manufacturers: Higher efficiency and lower production costs
The snap-fit design can significantly reduce the number of screws required for protective mask installation. This simplifies the assembly process, shortens production cycles, and frees up production capacity.
It can also reduce the consumption of auxiliary materials such as screws, helping lower manufacturing costs.
For end users: Easier maintenance and lower operating costs
During display maintenance, the protective mask can be removed and reinstalled more easily.
This simplifies maintenance operations, improves service efficiency, and can reduce long-term maintenance costs.
Take the 2391B LED as an example.
Its overall height is 1.7 mm, which is 0.14 mm higher than the 1.56 mm height of conventional individual LEDs.
The additional height provides sufficient space for the side snap-fit design. This helps prevent excessive pressure on the protective mask during installation, which could otherwise cause the mask to warp.
By reducing the risk of mask deformation blocking the LED pixels, the design helps prevent potential negative effects on display performance.
Kinglight’s outdoor 2-in-1 LEDs use an 8-pin design, increasing the soldering contact area between the LED and PCB.
The component can achieve a pulling force of 4–5 kg, while the pad adhesion is more than twice that of conventional individual LEDs.
Combined with the impact-absorbing protection provided by the protective mask, the design creates a dual-layer protection system.
This helps the LED withstand external impacts during assembly, disassembly, stacking, and transportation, reducing the risk of LED damage or detachment.
It can also help reduce costs associated with LED replacement and on-site maintenance in rental applications.
This series of LEDs supports a whole-display brightness output of 4000–5000 nits and uses high-quality imported encapsulation resin.
When used together with a protective mask, the LEDs can provide a dual anti-reflection effect, helping suppress glare and stray light under strong outdoor lighting conditions.
The result is a clearer and more stable visual output.
Kinglight’s outdoor rental 2-in-1 LEDs combine several design features aimed at the demanding requirements of rental LED displays.
The 8-pin, high-pulling-force design improves resistance to impact and helps enhance component reliability. The integrated snap-fit design can reduce the complexity and cost of protective mask assembly while improving installation and maintenance efficiency.
At the same time, the LEDs offer high brightness and a matte, low-reflection surface, helping maintain image quality in bright outdoor environments.
Compared with conventional individual LED solutions, Kinglight’s outdoor 2-in-1 LEDs provide advantages in component reliability, manufacturing efficiency, and overall lifecycle cost.
They offer a practical component solution for building high-end outdoor rental LED displays.
